Shopping Cart
The Joyetech EX Coils essentials in 10 seconds
- All-Terrain Profile: The internal architecture of this family allows you to switch from blowing huge clouds to extremely tight draws just by swapping the coil.
- Golden Connectivity: Their design incorporates gold-plated conductive heads that ensure a flawless ohm reading on your battery.
- No Drips: A solid threaded base paired with double silicone O-rings completely shields the clearomizer from messy juice leaks.
Compatible Devices
The EX Series fits perfectly across Joyetechs extensive Exceed lineup:
Joyetech Exceed D19 | Joyetech Exceed D22 | Joyetech Exceed D22C | Joyetech Exceed Edge | Joyetech Exceed Grip | Joyetech Exceed Box
Pick your perfect ohm rating
Joyetech makes it easy by clearly separating their coils into three categories. Choose yours:
- 0.4 ohm EX-M Mesh (10W - 13W): The most modern version featuring an internal mesh (M). Its ultra-fast heating at low wattages extracts the flavor of your e-liquids like no other in the series. Ideal for moderate DL draws.
- 0.5 ohm DL (20W - 35W): Designed for rich and warm vapor (Direct-to-Lung). It features a wide central cylinder to allow massive airflow, brilliantly highlighting intense fruity liquids.
- 1.2 ohm MTL (8W - 14W): The flagship coil for ex-smokers. Super narrow chimney and restrictive airflow. Excellent for vaping in battery-saving mode and strictly designed for high-strength Nicotine Salts.
Frequently Asked Questions about Joyetech EX Coils
Can I put EX coils in my old eGo AIO or Cubis tank?
No. Joyetech designed the Exceed line to be mechanically very different. These coils are wide and screw into the base of the tank. Older AIO systems use the BF family, which are elongated and screw into the top chimney.
When changing them, sometimes the thread gets stuck. Why does this happen?
Metal expands with the heat of continuous vaping. If you screw the new coil in too tightly, it will be extremely difficult to unscrew it once it gets hot. Thread it in gently just until you feel the rubber O-ring seal the base, do not apply excessive force.
