Shopping Cart
The Smok TFV18 Coils essentials in 10 seconds
- Extreme Conductivity: Manufactured with a Nickel-Chrome (NiCr) base and internal copper connectors. Power transfer is instantaneous, with absolutely zero ramp-up delay when firing the mod.
- Honeycomb Architecture: The mesh wraps very tightly around the massive organic cotton block, eradicating hot spots and drastically extending the coil's lifespan.
- Wicking Beast: Three giant side windows allow even the thickest liquids (Max VG) to flow like water right into the core of the atomizer.
Compatible Devices
These mammoth coils are built for Smok's flagship tanks:
Smok TFV18 Tank | Smok Morph 2 Kit | Smok Arcfox Kit
* Magically, due to shared architecture, you can also use these in the Smok TFV16 Tank.
Choose how to dominate the vapor
Performance at over 100 watts is guaranteed. Decide the focus you want for your draw:
- 0.33 ohm Mesh (80W - 140W / Best 100W-110W): A single massive mesh cylinder. Releases a very mellow and smooth flavor. Since it has less metal inside, it leaves more room for airflow, creating a cooler and airier draw.
- 0.15 ohm Dual Mesh (80W - 140W / Best 100W-110W): Double internal mesh cylinders. Generates even larger, thicker, and warmer vapor production. The sweetness extraction is brutal, saturating the palate rapidly.
Frequently Asked Questions about TFV18 Coils
Why do you recommend using High VG liquids?
These coils consume an astronomical amount of liquid. If you use 50/50 liquids, being so fluid, they might leak straight down into the airflow base or cause intense spitback in your mouth. With 70% or 80% VG juices, vaporization at 100W will be clean and smooth.
My mod displays "Low Resistance" sometimes, why?
Make sure this huge coil is screwed tightly into the bottom base. Its rear copper connectors (which boost conductivity) must be clean and press firmly against the 510 pin. If the issue persists, remove it, wipe the base with a paper towel, and thread it back in firmly.
