AVATA Pod Kit 1100mAh 18W - Aspire

A revolutionary pod with 15ml of autonomy made of aluminium.

Discover the new Aspire Avata Pod Kit, a device that breaks all known limits in the world of portable vaping. Equipped with an integrated 1100mAh battery, fast USB-C charging and an innovative 15ml tank, this pod becomes the ideal companion for worry-free vaping all day long.

3 vaping modes and dual-compartment cartridge with up to 15ml

Thanks to its smart chip, you can choose between Eco, Nor or Max modes, according to your vaping style. Its innovative 15ml cartridge is divided into two compartments: the first 5ml is used directly and, when empty, you can activate the bottom valve to release the additional 10ml. Fewer refills, more control.

Why is it unique?

Extreme Autonomy: 15ml capacity and long-lasting battery.

Triple Customization: Adapt the power to your style with 3 vaping modes.

Smart Technology: Advanced chip and dual-chamber design for greater practicality and control.

Aspire Avata Pod Kit Contents:

✔ 1x Aspire Avata Pod

✔ 1x 0.6 ohm Cartridge

✔ 1x USB-C Cable

✔ 1x User manual

Technical characteristics:

Autonomy: Integrated 1100mAh battery

Maximum power: Up to 30W

Vaping modes: Eco / Nor / Max + Auto-draw

Chipset: Smart with automatic detection

Tank: 15ml total (5ml + 10ml with valve)

Integrated coil: 0.6ohm (non-replaceable)

Airflow: Adjustable

Charging port: USB-C

Display: Circular with battery and mode indicator

Dimensions: 94.8mm x 44.5mm x 23mm

Inhalation: Direct or indirect (RDL or MTL)

Quick usage guide:

1. Fully charge the device with the included USB-C cable.
2. Add e-liquid from the base of the cartridge.
3. Wait 2-3 minutes before vaping after the first fill.
4. Select your preferred vaping mode: Eco, Nor or Max.

Liquid refill:

1. Remove the cartridge from the Aspire Avata device.
2. Position the red reserve lever to the "open" position.
3. Open the bottom silicone valve.
4. Refill the liquid until both tanks are full.
5. Close the silicone valve and set the red lever to the "close" position.
6. Place the cartridge back into the device. If it's the first time you are filling the tank, wait 10 minutes before using it to allow the liquid to saturate the cotton and prevent the coil from burning.

Refill the main tank from the reserve tank:

1. Remove the cartridge from the Aspire Avata device.
2. Position the red reserve lever to the "open" position.
3. Let the liquid flow down to the bottom tank until it is full.
4. Set the red lever to the "close" position.
5. Place the cartridge back into the device. It will now be ready to vape.