Available for immediate delivery
Warning: Last items in stock!
By buying this product you can collect up to 1 loyalty point. Your cart will total 1 point that can be converted into a voucher of 0,10 €.
eGo AIO D22 Kit - 1500 mAh + 2 ml
(eGo AIO V2)
6 new colors to suit all styles.
New design with 22 mm diameter and 12 mm shorter than the AIO 19mm, keeping all its amazing features.
The new generation to get started in vaping.
Device "All in One" with eGo and Cubis deftly combined technology: elegant, light and powerful.
New device childproof lock.
indicator light in 7 colors, with possibility of deactivation.
Very comfortable Refilling top.
Compatible with BF Cubis resistors.
Complies with the new European directive for tobacco products (TPD).
|We guarantee that this item is totally original brand JOYETECH.|
POSSIBLE PROBLEMS AND SOLUTIONS WITH EGO AIO:
This equipment comes with two coils Cubis BF 0.6ohm; There are users who, for their vaping way, they can find it too strong, reaching high temperature steam, which can be unpleasant. Being an equipment without power regulation, to lower performance you can use coils Cubis BF 1ohm.
There are many people who find mouthpiece(drip tip) spiral annoying because it concentrates the steam and may be too hot. We recommend you use included transparent drip tip, since being longer, cools the steam to obtain a more pleasant feeling.
Depending on the vaping form and density of e-liquid used, sometimes the coil can become flooded, producing a sizzling and splashing fluid in the mouth. The solution is to remove the upper block, surround the coil with an absorbent paper and blow hard several times through the nozzle so that the excess liquid out of the coil. To prevent these floods, you can try to close the air intake so you spend less liquid to the coil.
Sometimes the device will not detect the coil and when the button is pressed flashing light and does not work. This may be because the base of the coil do not make proper contact with the battery. To facilitate contact, simply pinch slightly and take half a millimeter the metal pin (the metal part that is surrounded by a white rubber) at the bottom of the coil.
1 x eGo AIO D22
2 x coils SS316- 0.6ohm
1 x Spiral Drip tip eGo AIO
1 x Drip tip eGo AIO transparent
1 x cable USB
1 x Instruction manual in 5 languages
Remember that to use this kit, you need an e-liquid.
Here we offer you preferred by our customers, do not forget to select the amount of nicotine you want:
(Click on image):
1500 mAh Battery: Good autonomy to endure all day with an average consumption.
Diameter: 22 mm
Atomizer capacity: 2 ml
With only 3 pieces eGo AIO D22 will have a high-performance device.
The tank, which can not be separated from the battery, ensures a comfortable and leak-free filling.
Device ideal for carrying in your pocket without worrying about possible leakage of liquid.
Device "All in One" with the best technology of the latest Joyetech eGo batteries and stunning Cubis atomizer deftly combined.
Now you will not have to worry about leaving your ego AIO D22 with children nearby.
The locking system works the same way as the safety caps of bottles of e-liquid: you have to press and push down to unscrew the tank.
The inserted spiral structure mouthpiece is more beneficial for mouth inhale and is more secure.
Regulate air intake and hardness of the shed at the AIO D22 is as easy as turning the top:
To get more air, simply connect the two points that are engraved on the device.
Turning 90 degrees to the left or right will close the air inlet.
Press down and turn the top of the atomizer to remove the cover.
Add the liquid directly into the tank up to the mark.
No overtaking the mark to avoid overflow when mounting the cover
Before the first use of the BF resistor, it is desirable wet the cotton with a few drops of e-liquid and puffs to a vacuum (without pressing the button) for the liquid to properly wet cotton and avoid burning resistor.
In OFF position, hold the button eGo AIO D22 to change the color of light from red, yellow, green, blue, indigo, white or purple.
You can also turn off the light by a pulse more.
Connect the eGo AIO D22 with a computer or a wall adapter. (Output: DC 5V) via USB cable.
When fully charged, the light turns off.
* IMPORTANT NOTICE:
Before its first use, drip a few drops of e-juice to the atomizer head and wait 1 minute before vape.
In this way, you avoid dry burn and strange flavors.