Available for immediate delivery
Warning: Last items in stock!
By buying this product you can collect up to 2 loyalty points. Your cart will total 2 points that can be converted into a voucher of 0,20 €.
eGo AIO Kit - 1500 mAh + 2 ml
All in One
The new generation to start vaping.
All-in-One device with eGo and Cubis technology skilfully combined: elegant, light and very powerful.
New device with childproof lock.
Indicator light in 7 colors, with the possibility of deactivation.
Top padding very comfortable.
Compatible with Cubis BF resistors.
Complies with the new European directive for tobacco products (TPD)
Available colors: black, silver, black and silver, black and white, red and white.
|We guarantee that this article is completely original of the Joyetech brand.|
POSSIBLE PROBLEMS AND SOLUTIONS WITH EGO AIO:
This equipment comes with two coils Cubis BF 0.6ohm; There are users who, for their vaping way, they can find it too strong, reaching high temperature steam, which can be unpleasant. Being an equipment without power regulation, to lower performance you can use coils Cubis BF 1ohm.
There are many people who find mouthpiece(drip tip) spiral annoying because it concentrates the steam and may be too hot. We recommend using included transparent drip tip, since being longer, cools the steam to obtain a more pleasant feeling.
Depending on the vaping form and density of e-liquid used, sometimes the coil can become flooded, producing a sizzling and splashing fluid in the mouth. The solution is to remove the upper block, surround the coil with an absorbent paper and blow hard several times through the nozzle so that the excess liquid out of the coil. To prevent these floods, you can try to close the air intake so you spend less liquid to the coil.
Sometimes the device will not detect the coil and when the button is pressed flashing light and does not work. This may be because the base of the coil do not make proper contact with the battery. To facilitate contact, simply pinch slightly and take half a millimeter the metal pin (the metal part that is surrounded by a white rubber) at the bottom of the coil.
1 x Joyetech eGo AIO
2 x SS316 coils- 0.6ohm
1 x Drip tip eGo AIO coiled
1 x Transparent eGo AIO Drip Tip
1 x Instruction Manual in 5 languages
Remember that to use this kit, you need an e-liquid.
Here we offer you preferred by our customers, do not forget to select the amount of nicotine you want:
(Click on image):
The most recognized testing laboratory is UL (Underwriters Laboratories). UL verifies standards, which integrate the national standards for product certification regarding electrical and mechanical hazards with electrical products.
The eGO AIO has managed to be the first vape pen in the world to receive this recognition. Joyetech has made every effort to create a product of excellent quality both in its operation and in its manufacture.
This Certificate demonstrates that the eGO AIO is a reliable product that guarantees correct and safe operation during its useful life.
With only the 3 pieces of the eGo AIO you will have a high performance device.
The tank, which cannot be separated from the battery, ensures convenient and leak-free refilling.
Ideal device to carry in your pocket without worrying about possible liquid spills.
"All in One" device with the best technology of the latest Joyetech eGo batteries and the impressive Cubis atomizer skillfully combined.
You no longer have to worry about leaving your eGo AIO with children nearby.
EThe locking system works in the same way as the safety caps on e-liquid bottles: you have to press and push down to unscrew the tank.
The structure of the spiral drip tip of the eGo AIO is ideal for inhaling in the mouth and safer, avoiding splashes.
Regulating the air intake and the hardness of the puff on the eGo AIO is as easy as turning the upper part:
To get the most air intake, you simply have to join the two points that are engraved on the device.
Rotate it 90 degrees to the left or to the right you will close the air intake.
Press down and twist the top of the atomizer to remove the cap.
Add the eliquid directly into the tank up to the mark.
Do not exceed the mark to avoid overflow when reassembling the cap.
Before using the BF coil for the first time, it is convenient to moisten the cotton with a few drops of e-liquid and take a few empty puffs (without pressing the button) so that the liquid properly moistens the cotton and avoid burning the coil.
In the off position, press and hold the button on the eGo AIO to change the light color between red, yellow, green, blue, indigo, white, or purple.
The light can also be deactivated by pressing one more time.
Connect the eGo AIO with a computer or wall adapter. (Output: DC 5V) via USB cable.
When fully charged, the indicator light will turn off.
By eliminating the connections between atomizer and battery in the eGo AIO, a really small size is achieved without losing performance.
* IMPORTANT NOTE:
Before using this pod for the first time, we recommend filling with e-liquid and waiting 5 minutes with a full tank so that the cotton of the coil is completely moistened before using it.
In this way, you avoid dry burn and strange flavors.
Video Joyetech eGo AIO Kit
|Type of device||Kit Compact|
|Inhalation type||MTL (Mouth to lung)|
|Air intake||Upper air intake|
|anti-leak atomizer||Anti-leakage design|
|Type of spare parts (Coils)||Interchangeable Coils|
|Internal Battery Capacity||1500mah Internal|
|Activation||By push button|
|Charging port type||Micro USB|
|Bonus Features||Light weight|
|Complexity level||Beginner level|